All models from above categories are available in the colors shown below:
Technical Parameters
The design of frame-panel external doors
Specification:
Doors made of pine wood (finger jointed, glued layers and laminated alternately), veneered waterproof plywood /pine or oak/, filling the frame is a thermal insulation panel with a thickness 1 1/4in
Finishing:
Five layers of coating system using the method of hydrodynamic transparent painting in 12 colors or colors from the RAL palette.
Glazing:
Glazing set combined with glass reflex or matte with the possibility to use (optional) various windows, including ornaments and stained glass. At the door, their chance of converting wood panels on the glazing and vice versa.
Dimensions:
Exterior doors are available in standard sizes with no additional charge. Available in custom and untypical dimension, higher than 83 7/16in and broader than 40 3/16in. The maximum width is 44 1/8in.
The dimensions of insert lock:
Doors open to the outside: 45 Knob / 50
The door opened inwards: 50 Knob / 45
Standard equipment for the door (2 11/16in):
-
Wing with a thickness of 68 mm and a permeability thermal k 1.2 W / sqm
-
Fixed frame was 4 1/8in × 2 3/8in
-
Gasket/seal in the wing and frame
-
Two independent locks
-
The glazing combined set with glass flat reflex or matte glass
-
Three adjustable hinges regulated in 3 plains
-
Clip-on hinges
-
Wooden threshold with aluminum strips
TWIN DOORS
The design
frame-panel external doors
STILE DOORS
Standard equipment for the door (3 1/16in):
-
Wing with a thickness of 3 1/16in and a permeability thermal k 0,97 W / sqm (frame panel, and 0,88 W / sqm
-
Fixed frame was 4 1/8in × 2 3/8in
-
Gasket/seal in the wing and frame
-
Two independent locks
-
The glazing combined set with glass flat reflex or matte glass
-
Three adjustable hinges regulated in 3 plains
-
Clip-on hinges
-
Wooden threshold with aluminum strips
-
Burglary-proof rebate
Specification:
Doors made of pine wood (stile of glued layers and laminated alternately), veneered waterproof plywood /pine or oak/, filling the frame is a thermal insulation panel with a thickness 1 5/8in. (frame panel doors) and 2 3/8in (flat doors).
Finishing:
Five layers of coating system using the method of hydrodynamic transparent painting in 12 colors or colors from the RAL palette.
Glazing:
Glazing set combined with glass reflex or matte glass with the possibility to use (optional) various windows, including ornaments and stained glass. At the door, their chance of converting wood panels on the glazing and vice versa.
Dimensions:
Exterior doors are available in standard sizes with no additional charge. Available in custom and untypical dimension, higher than 83 7/16in and broader than 40 3/16in. The maximum width is 44 1/8in.
The dimensions of insert lock:
Doors open to the outside: 50 Knob / 50
The door opened inwards: 50 Knob / 45