All models from above categories are available in the colors shown below:

Winchester
Winchester
press to zoom
Golden Oak
Golden Oak
press to zoom
Rustic Oak
Rustic Oak
press to zoom
Dark Oak
Dark Oak
press to zoom
Mud Oak
Mud Oak
press to zoom
Nut
Nut
press to zoom
Dark Nut
Dark Nut
press to zoom
Chestnut
Chestnut
press to zoom
Mahogany
Mahogany
press to zoom
Afromosia
Afromosia
press to zoom
Rosewood
Rosewood
press to zoom
Venage
Venage
press to zoom
 

Technical Parameters

The design of frame-panel external doors

door cross section STILE  Houster Choice

The design

frame-panel external doors

STILE DOORS

Standard equipment for the door (3 1/16in):

  • Wing with a thickness of 3 1/16in and a permeability thermal k 0,97 W / sqm    (frame panel, and 0,88 W / sqm 

  • Fixed frame was 4 1/8in × 2 3/8in

  • Gasket/seal in the wing and frame

  • Two independent locks

  • The glazing combined set with glass flat reflex or matte glass

  • Three adjustable hinges regulated in 3 plains

  • Clip-on hinges

  • Wooden threshold with aluminum strips

  • Burglary-proof rebate

Specification:

Doors made of pine wood (stile of glued layers and laminated alternately), veneered waterproof plywood /pine or oak/, filling the frame is a thermal insulation panel with a thickness 1 5/8in. (frame panel doors) and 2 3/8in (flat doors).

Finishing:

Five layers of coating system using the method of hydrodynamic transparent painting in 12 colors or colors from the RAL palette.

Glazing:

Glazing set combined with glass reflex or matte glass with the possibility to use (optional) various windows, including ornaments and stained glass. At the door, their chance of converting wood panels on the glazing and vice versa.

Dimensions:

Exterior doors are available in standard sizes with no additional charge. Available in custom and untypical dimension, higher than 83 7/16in and broader than 40 3/16in. The maximum width is 44 1/8in.

The dimensions of insert lock:

Doors open to the outside: 50 Knob / 50 
The door opened inwards: 50 Knob / 45

 

Specification:

Doors made of pine wood (finger jointed, glued layers and laminated alternately), veneered waterproof plywood /pine or oak/, filling the frame is a thermal insulation panel with a thickness 1 1/4in

Finishing:

Five layers of coating system using the method of hydrodynamic transparent painting in 12 colors or colors from the RAL palette.

Glazing:

Glazing set combined with glass reflex or matte with the possibility to use (optional) various windows, including ornaments and stained glass. At the door, their chance of converting wood panels on the glazing and vice versa.

Dimensions:

Exterior doors are available in standard sizes with no additional charge. Available in custom and untypical dimension, higher than 83 7/16in and broader than 40 3/16in. The maximum width is 44 1/8in.

The dimensions of insert lock:

Doors open to the outside: 45 Knob / 50 
The door opened inwards: 50 Knob / 45

Standard equipment for the door (2 11/16in):

  • Wing with a thickness of 68 mm and a permeability thermal k 1.2 W / sqm

  • Fixed frame was 4 1/8in × 2 3/8in

  • Gasket/seal in the wing and frame

  • Two independent locks

  • The glazing combined set with glass flat reflex or matte glass

  • Three adjustable hinges regulated in 3 plains

  • Clip-on hinges

  • Wooden threshold with aluminum strips

TWIN DOORS

door cross section TWIN Houster Choice.p